Separation is the primary purpose of gas chromatography. But as well as separating the components within a mixture, researchers need to detect the components as they’re eluted off a chromatography column.
That’s where a detector comes in – and there are a long list of options available. So, how do you narrow down your choice and find the right gas chromatography detector? Read on as we list five good detector characteristics.
Reproducibility is the ability to provide repeat precision when certain variables change for analyses. That includes things like location, measuring systems and measurement conditions. A good detector should provide a reproducible response, including when the concentration of eluting compounds changes within the carrier gas.
A detector’s linear range refers to the amount of an analyte that can be detected while still maintaining a directly proportional relationship with the signal intensity. So, if you double the amount of said analyte in the sample, the signal intensity should also double. To be suitable for a higher number of analyses, you’ll want your detector to have a good range.
Sensitivity is critical to detection, covering an instrument’s ability to detect the smallest changes in a sample. It goes without saying that a good detector will have high sensitivity – but we’ll say it anyway! This is one of the characteristics discussed in the article ‘Expanding the Boundaries of Light Scattering for Macromolecules’, which explores how to improve light scattering detection.
Another characteristic of a good detector is small internal volume to create narrow peaks in your results. However, it also makes it easier to flush previous sample traces and avoid what’s known as “dead volume”. This refers to any volume that flows through the system without interacting.
Finally, there’s the distinction between destructive and non-destructive detectors. These two categories of detection are based on whether or not the detector transforms the effluent. Destructive detectors do so, making it harder or impossible to recover the sample. They include:
In contrast, non-destructive detectors measure the eluent directly to aid recovery. They include:
As you can imagine, it’s beneficial if a detector is non-destructive, which makes this another characteristic of a good detector.